
A mixed blueprint takes the appearance of the wood that contributed the largest share. The plank that finishes construction can have very little influence on the result.
Read the fill percentage
Place the blueprint on your land with the Blueprint Manager and feed it milled planks. Suppose oak takes the meter to 70% and elm supplies the remaining 30%. You finish with an oak piece even though elm was the last plank you carried over.
Source: Blueprint fill and mixed wood
Keep a row of panels consistent
Stack one wood type beside the build if every panel should match. When mixing two woods, give the intended finish more than half of the fill. Counting the boards by hand can mislead you because a long plank contributes more wood than a tiny offcut of the same thickness.
Source: Blueprint fill and mixed wood
Sources
Interfaces and rules can change. Check the official pages above for current requirements.